LMI Gocator 2000 Family, User Manual

Page: 125 / 194

Ethernet Protocol • 125 Gocator 2000 Family
ProfileMeasurement
The ProfileMeasurement element contains settings that affect profile measurement. Simple child
elements in ProfileMeasurement are defined below:
ProfileMeasurement Child Elements
Element Type Description
MeasurementOptions String Constraint for available measurement types - comma delimited list (e.g.
“Width, Distance”).
The ProfileMeasurement element also contains two significant sub-elements: Anchor and Measurements.
The Anchor element defines profile anchoring behavior, while the Measurements element contains one
sub-element for each requested profile measurement.
The id attribute associated with each measurement defines an identifier that must be unique among all
measurements in the configuration file.
e.g.
<Width id=”1001”>
Most profile measurement elements contain one or more Area, Feature, Line sub-elements. These
common structures are described first.
a
rea
An Area element defines a rectangular area of interest.
Area Child Elements
Element Type Description
X 64f Setting for area x position (mm).
Z 64f Setting for area z position (mm).
Width 64f Setting for area width (mm).
Height 64f Setting for area height (mm).
f
eaTure
A Feature element defines the settings for detecting a feature within an area of interest.
Feature Child Elements
Element Type Description
Type 32s Setting to determine how the feature is detected within the area:
0 – Top
1 – Bottom
2 – Right
3 – Left
4 – Corner
5 – Average
6 – Rising Edge
7 – Falling Edge
8 – Any Edge
9 – Top Corner
10 – Bottom Corner
11 – Left Corner
12 – Right Corner
Area Area Element for feature detection area.