LMI Technologies Gocator 2300 Series, User Manual

Page: 254 / 431

Gocator 2300 & 2880 Series
Gocator Device Files • Job Files • 254
Element Type Description
RegionCount 32s Count of the regions.
Regions (Collection) The regions used to calculate a line. Contains one or two Region elements
of type
ProfileRegion2D
.
ProfileLine Child Elements
ProfileRegion2d
An element of type ProfileRegion2d defines a rectangular area of interest.
Element Type Description
X 64f
Setting for profile region X position (mm).
Z 64f
Setting for profile region Z position (mm).
Width 64f
Setting for profile region width (mm).
Height 64f Setting for profile region height (mm).
ProfileRegion2d Child Elements
Surface Types
The following types are used by the various measurement tools.
Region3D
An element of type Region3D defines a rectangular area of interest in 3D.
Element Type Description
X 64f Volume X position (mm).
Y 64f Volume Y position (mm).
Z 64f Volume Z position (mm).
Width 64f Volume width (mm).
Length 64f Volume length (mm).
Height 64f Volume height (mm).
Region3D Child Elements
SurfaceFeature
An element of type SurfaceFeature defines the settings for detecting a feature within an area of interest.
Element Type Description
Type 32s Setting to determine how the feature is detected within the area:
0 – Average (formerly Centroid 2d)
1 – Centroid (formerly Centroid 3d)
2 – X Min
3 – X Max
4 – Y Min
5 – Y Max
SurfaceFeature Child Elements