31
2.2.7 Recipes
On the
Recipes
tab, you can define recipe-related parameters. The
Recipes
tab is depicted in the figure below:
The settings on the
Recipes
tab are:
•
Recipe settings
— Settings related to the selected scanning recipe.
•
Jobs
— The name of the selected job. The buttons are:
•
Add
— Add a new job.
•
Remove
— Remove the selected job.
Note:
You cannot remove the Master job.
•
Start X
— Define the starting X coordinates.
The X axis scan line interval depends on the sensor, as follows:
•
On LCI1200, the interval is 11 mm (0.43”).
•
On LCI1201, the interval is 11 mm (0.43”).
•
On LCI1600, the interval is 16.4 mm (0.65”).
•
On LCI401, the interval is 4.3 mm (0.17”).
The table coordinates are depicted in the figure below:
Figure 29 Recipes Tab
