50
19.
Select Sensitivity
— Best Sensitivity or Best Accuracy used in simplified peak detection.
20.
Open Advanced Camera Parameters.
See 2.2.7 Recipes for usage of parameter
21.
Select the output file formats.
The output file formats are:
•
FocalSpec Map — Use the .sur file format.
•
PCD — Use the .pcd file format.
•
Bitmap — Use the .bmp intensity file format.
•
CSV — Use the .csv file format to present XYZ intensity in the ASCII format.
Regardless of the file type selection or selections, always select the Layers from which data will be saved. Lower
layers are applicable in the case of transparent materials.
File Sizes
indicates the size of the desired output file.
22.
Open
After Measurement
.
After measurement
— The actions to be carried out automatically after the measurement has been completed.
Open with
— Select the program, with which the scan result will be opened, once the scanning is completed. The
options are:
•
None
•
PCD viewer
•
CloudCompare
•
FocalSpec Map
•
Bitmap Viewer
Start the next measurement by using none recipe
— Use
Change Recipe
to select a different recipe for the next
scan.
After measurement unload sample to
— use
Select position
to automatically return the table after the
measurement to the position selected with the
Load / Unload
function in the
Motor Control
window.
23.
Save the Recipe.
24.
Open the
Measurement
page.
25.
Give the measurement a name.
Enter a name for the measurement into the field.
The name is used in the output files, when saving the measurement results.
26.
Start the measurement with the green button on the Controller.
When the measurement is completed, you can find your results on the
Analysis
tab with the name that you have
given to the measurement.
