3
Turn on/off bracelet
3.1
Turn on the bracelet
Press and hold “power on /off” button for 2 seconds
until the green LED flashes quickly.
3.2
Turn off the bracelet
Press and hold “power on /off” button for 4 seconds
until the LED flashes quickly.
4.1
Pairing bracelet with phone
This bracelet is to be used with Bluetooth enabled
mobile phone. Setting up as below:
•
Keep bracelet and phone within 1 meter apart
•
Make sure the bracelet is turned off
•
Hold the “power on /off” button for 4 seconds until the
green and blue LED flash alternatively.
•
Initiate Bluetooth function on your mobile phone, and
then search for Bluetooth devices. If it is successful,
the mobile phone will show the name of Bluetooth
device “bracelet”.
•
Press “yes” to pair this bracelet with phone.
•
Input ID code of bracelet “0000”, Press “Yes”to
complete pairing, then green LED will flash 5 times,
so that bracelet is under stand-by mode and ready for
Bluetooth communication .Press locate this bracelet
within 10 meters (max. ) to phones.
Notice: If pairing process can’t be completed within 2 minutes,
the red LED will flash and the bracelet will turn off automatically.