background image

5

oPeRATIoN

PRePARATIoN beFoRe USe

1.  Clean the cooking plate with a soft dry cloth. Place your griddle on a level and stable surface near the 
 

electrical socket.

2.  Check that the voltage marked on the product corresponds with your supply voltage. Ensure the 
 

controller is in the “Off” position before plugging it in.

3.  For use, the Griddle should be operated at MAX temperature, No. 5, for approximately 10 minutes. This 
 

removes any protective oils that are used during production. 

4.  Allow to cool and follow the cleaning instructions.

NoTe:

 When using the griddle for the first time, there may be a smell of smoke coming from the surface of 

the cooking plate. This is normal because of the protective coating in production.        

HoW To USe

1.  Plug the “Thermostat Controller” into the socket and ensure the dial is set to “Off” position.
2.  Plug the mains cord into the mains supply.
3.  Choose your desired temperature by turning the dial, the indicator will illuminate to advise that the  
 

cooking plate is heating up.

HeATING leVelS

Warm

100-120C (Red Gradient)

1

120C

2

150C

3

180C

4

210C

5

240C

4.  Once your desired temperature as been reached the indicator light will go off, and the unit will maintain 
 

that temperature setting.

5.  Very little fat/Oil is needed during cooking process
6.  It is better to marinate or coat your food before placing on the griddle for cooking.
7.  Residue Fat / Oil from the food will be collect at the front of the cooking plate and drained into the “Drip 
 

Tray” situated at the bottom of the griddle. DO NOT USE without the Drip Tray.

WARNING!

 Do not use metal utensils with this product; only use wooden or heat resistant plastic utensils 

to avoid scratching the non-stick surface. DO NOT! Cut the food with any sharp utensils on the griddle this 
will also damage the non-stick surface.

8.  The thermostat can be removed if you wish to serve your food off the griddle itself. Please use extreme 
 

caution when removing the food as the griddle can get very hot. Always use the handles provided and 

 

care should be taken as not to spill fat from the Drip Tray or allow the Drip tray to become detached from 

 

the unit.

CAUTIoN : HoT SURFACe – do NoT ToUCH. USe oF oVeN GloVeS IS ReCommeNded.

Summary of Contents for E4302BK









Reviews: