3
MINIMUM DISTANCES - LAMP TO OTHER SURFACES
KEEP THE MINIMUM DISTANCE
FROM ANY OBJECT - WHEN
ILLUMINATED - TO AT LEAST
• If grease or dirt is seen to get onto the bulb, carefully wipe clean with a lint-free cloth moistened with
methylated spirit whilst the lamp is unplugged.
• Touch Lamp; Do not use CFL (Compact Fluorescent) bulbs that are not suitable for use with dimmer.
• Touch Lamps are not suitable for persons under the age of 14 years.
• Touch Lamps are not suitable for persons fitted with a pacemaker.
Stand
the unit
upright
on a flat, stable surface and
remove
the locking nut from the
threaded Lamp Holder
Position
the satin lampshade over the lamp holder by
inserting
the threading through
the ring on the lampshade.
Note:
for transportation purposes, the lampshade is packaged upside down. Be sure to turn
this the correct way up before positioning on to the lamp holder
Secure
the lampshade into position by
screwing
the locking nut back into place.
Caution: Do Not over tighten the locking nut as this could cause damage to the lamp
Screw
on 1 x E27 35w Max. Halogen Golf Ball Bulb or 9w Energy Saver into the Lamp Holder.
1
2
3
4
ASSEMBLY
PAT TEST WARNING
This lamp contains a touch sensor and therefore should not be exposed to very high test voltages such as
PAT testing, as this could reduce the life of the sensor.
