Lloyd LIC16PB, Instruction Manual

Page: 13 / 17

Cleaning and Maintenance
Self-Diagnosis for Abnormalities
10
Before cleaning, please switch off the appliance first and then
disconnect the power plug from the power outlet. Wait till the cooker
plate of the induction cooker is not hot and then start cleaning.
After using the induction cooker for a long time, the opening of air
inlet/air outlet will pile up with dust or other dirt, please wipe it with a
soft dry cloth. Dust in the air inlet and outlet can be cleaned by using
a soft brush or a mini vacuum cleaner.
Note: Please do not rinse it with water
For oil spots on the cooker plate, wipe the cooker plate by using a
soft moist cloth with a little tooth paste or mild detergent. And then
use a soft moist cloth to wipe it until no stain remains.
When not using it for a long time, please disconnect the power plug
from the power outlet and protect the induction cooker from any dust
or bugs.
Abnormalities Key checking points and troubleshooting
After plugging in the power cord
and pressing the “ON/OFF” key,
the indicator and display do not
light up.
The “ON/OFF” indicator lights up
and the display works normally, but
heating does not start.
Heating suddenly stops during the
process.
Is the power plug properly connected?
Is the switch, power outlet, fuse or power cord
damaged?
Is the pot material proper?
Is the appliance in a “Preset” working status?
For other causes, take the appliance to a
repairing and maintenance site to be fixed.
Is the temperature of the oil too high when frying
dishes?
Is the temperature of the surroundings very
high?
Is the air inlet or air outlet of the induction
cooker blocked?
Is the default heating time of the induction
cooker over?
The self-safety protection of the induction
cooker starts, wait for several minutes and then
connect power to use it.