Be sure to disconnect the AC power cord before installing a stand or wall-mount brackets.
Carefully place your TV facedown on a soft,cushioned surface to prevent damage to the TV or
scratching to the screen.
1. Use the screws (ST4 x 10F) x 4 to fix the Neck and Base.
2. Attach the stand to the TV set as shown in the picture.
3. Use the screws (M4 x 12) x 4 to fix the stand tightly.
Product image is only for reference,actual product may vary in appearance:
Accessories List
Installing the Stand
User Manual × 1 Quick Setup Guide × 1 Remote Control × 1 Battery × 2
Screws(ST4 × 10F) × 4 Screws(M4 × 12) × 4
The TV screen is very fragile,and must be protected at all times when removing the base stand.Be
sure that no hard or sharp object,or anything that could scratch or damage the screen,come into
contact with it.DO NOT exert pressure on the front of the TV at any time because the screen could
crack.
For tabletop use,the TV must be attached to the provided stand as shown on this page.
1
2
Powering up or down the TV requires several seconds of processing time.Do not rapidly turn the TV on/off as
abnormal operation may occur.
Remote Sensor
Receive remote signals from the remote control.
Do not put anything near the sensor, as its function may be affected.
Remote Indicator
Red light up in standby mode. Blue light up in power on mode
MENU
Open the OSD menu
SOURCE
Select among the different signal sources.
＜
CH
＞
＜
VOL
＞
Select the channel
Adjust the volume.
STANDBY
Turn on the TV or put the TV in standby mode.
1
2
Remote Sensor
Remote Indicator
STANDBY
MENU SOURCE
V
V
V
V
CH
VOL
AC Power ON/OFF
Summary of Contents for L32ND
Page 1: ...ES M142108 L32ND ...