1. Preparation
[1]
Over Temp. Limiter
the temperature go over the set temperature, shut out the power of
heater immediately to prevent overheat, user need to set 10% higher
temperature from actual treat.
[2]
Temperature Controller
use for controlling temperature inside.
[3]
Door
insulation between inside and outside of chamber, prevent overheated
of surface.
[4]
Door Handle
handle to open and close the door.
[5]
Glass Door
observe the internal through the Glass Door.
[6]
Shelf rail
used for fixing shelf, adjustable of height of shelf.
[7]
Shelf
2 type as wire and perforated, used for put on the sample inside chamber.
[8]
Door Packing
Silicone packing resistant seal the chamber.
[9]
Chamber
space for treat made with stainless.
[10]
Power Swtich
on/off switch for main power.
7
