ENGLISH
BEFORE YOU OPERATE THE MONITOR 7
FITTING AND REMOVAL OF BASE : ProLite E2791HSU
CAUTION
Put the monitor on a stable surface. The monitor may cause injury or damage if it
falls or is dropped.
Do not give a strong impact to the monitor. It may cause damage.
Unplug the monitor before removal or installation to avoid an electric shock or a
damage.
<Removal>
Put a piece of soft cloth on the table beforehand to
prevent the monitor from being scratched. Lay the
monitor fl at on a table with front face down.
Remove the ‘thumb screw’ to remove the base from the
monitor.
Unfi x the screw and remove the Stand.
Pull the hook of the Cable Holder outside and remove
it.
<Installation>
Put a piece of soft cloth on the table beforehand to
prevent the monitor from being scratched. Lay the
monitor fl at on a table with front face down.
Hold the monitor and install the stand. Secure it using
the screw provided.
Install the stand-base to the stand.
Use the ‘thumb screw’ provided to secure the base to
the monitor.
Place the Cable Holder.
Stand-Base
Stand
Cable Holder
Screw
Screw
Cable Holder
Thumb screw
for Stand-Base fixing
Thumb screw
for Stand-Base fixing
Summary of Contents for ProLite BZ7B1HSU
Page 2: ...ENGLISH ...
