Baffin neoSIT
Edition 8
9
6.3
Fixing and Adjusting the Vest, Legs abduction belts and Pelvic Belts
The vest and the pelvic belts are fixed to the chair with the use of belts. To fix the vest correctly, pass the fastening belts
through the holes in fastening loops 26. The length of the fastening belts can be adjusted by passing the belts through
fastening loops on the backrest, or through the buckles which fix the belts to the vest. The pelvic belts are fixed to the
fastening loops located behind the
armrests 27. The length of the belts is
adjusted by passing the fastening belts
(loosening or tightening) through the
fastening buckles or loops.
ATTENTION: Check precisely that the adjustment is correct:
1.
No element exerts excessive pressure on user's body.
2.
There is not toomuchfree space between the user and the device.
3.
All adjustment screws and knobs are re-tightened after the adjustment process is completed.
4.
Make sure all belts are correctly fixed in the fastening loops and all vest and hip belt buckles are
correctly secured.
6.4
Table
6.4.1 Adjusting the Spacing of the Table Handles
To adjust the spacing of the table handles 1 to the spacing of the table sockets 2 located in the armrests, loosen the screws
5, which can be found on the table handles under the table top. Join or draw the handles apart adjusting them to the
spacing of the sockets and tighten the table handles screws.
6.4.2 Table Assembly