User manual
3
Plug the micro USB cable into micro USB charging port and connect the other end of the cable to either a
computer USB port or to a USB- compatible car or wall charger.
A red LED light will appear to indicate when the headphone is charging. When charging is complete, the
LED light will turn off.
ON/OFF
1. On: Press and hold the
Multi-function
button (9) for 3 seconds.
2. Off: Press and hold the
Multi-function
button (9) for 3 seconds to turn off.
Bluetooth® pairing
If the unit has never been paired with a Bluetooth® device before, you need to follow the instructions
below to pair the headphone with your Bluetooth® device:
1.
Long press on button (9) to turn on the headphone, then the heardphone will automatically enter
pairing with LED flashing alternately red and blue.
2.
Activate the Bluetooth® function and search for pairing name TES238.
3.
Click TES238 to connect, if indicator turn blue it is ok.
4.
Pairing mode can last 10 min, if you miss the pairing time, you need to restart the device and repeat
above steps.
5.
When turning on the headphone can automatically coonect to the last device that you had paired.
6.
The headphone will automatically turn off if headphone has no connection or lose connection for
10min.
The headphone will connect automatically, if paired before.
Answer/End a call
Press the button (9) to answer a call and to end a call.
Tip: since some mobile phones default to answer calls via their own receiver, please refer to the instruction
of your phone and set on your phone
.
Reject a call
Press 2 seconds the button (9) to reject a call.
Redialing
Double press the button (9) to redial the last number in you call logs
Play/Pause
When the Bluetooth® headphone connects to the device, short press the play/pause button (3).
NEXT: long press
to select next song
PREV: long press
to select previous song
VOL +: short press
to increase volume
VOL -: short press
to decrease volume