Instruction Manual
3
Speaker will automatically be paired if the mobile device has been paired before.
Press and hold
button for 2 seconds can disconnect the connected Bluetooth® device. Press and hold
to power off.
Playing Music
Select a song, artist, genre, or playlist on your phone, tablet or other Bluetooth enabled audio device.
Press
to start or pause the music.
Press and hold the + or
-
button to adjust the volume.
Short press the + or
-
button to go to next or last songs.
Hands-free for calling
Answer or hang up a call by pressing
Button.
Reject a call by pressing and holding
Button.
Double press
Button to call back the last number.
Wireless charging function
Connect to DC5V 3A or DC9V 2A power supply by provided Micro-USB Charging cable (2A date cable), the
red LED light in the USB port will be on.
Put your mobile phone which supports wireless charging on the top of the center charging area.
It starts to be charged and will show battery status on your phone during charging.
Remark: If your mobile phone supports 10W wireless charger, the speaker will Auto charge base on 10W. If
your mobile phone supports only 5W wireless charger, the speaker will Auto charge base on 5W.
Alarm clock function
Edit clock time
HOUR EDIT: Double-press Clock button to enter editor interface. Press “+” or “-” to Adjust hour.
MINUTE EDIT: After hour edit, short-press Clock button to switch to minute edit. Press “+” or “-” to Adjust
minute. Short-press Clock button to confirm and exit edit mode. No operation for 5 seconds will
automatically confirm and exit.
Alarm clock setting
Alarm Clock 1:
Press and hold Clock button for 2 seconds to enter alarm setting interface.
After the display showed “ALA1”, short-press “+” or “-” to switch on/off the 1st alarm.
Press the clock button then press “+” or “-” to adjust hour, short-press the clock button again to switch to
minute.
Press “+” or “-” to adjust minute.
No operation 5 seconds will automatically confirm and exit.
Alarm Clock 2:
After alarm1 setting confirmed, short-press Clock button to switch to alarm 2 “ALA2” setting.
