User manual
2
INSTRUCTIONS FOR USE
Connect one end of the USB cable (included) to the Micro USB port under the unit, and the other end of the cable
to the USB DC 9V source inside your car. A blue light blinks then turns red and .
Press the lock button to release the front clamp and secure the unit onto the grill of air vent.
Then, secure your phone safely and tightly with the phone mount.
Wireless charging of the phone will start immediately, with the Red light around the unit turning to Blue
and blinking.
Remove your phone from the phone mount after fully recharging.
IMPORTANT:
Some phone cases do not support Wireless Charging due to their thickness and design. If
your Phone model is compatible with Wireless Charging and you’re unable to charge it wirelessly, please
remove your phone case and retry.
Care and Maintenance
Read the following recommendations before using the product. Following these you will be able to enjoy
the product for many years.
•
Do not expose the device to liquid, moisture or humidity to avoid the product’s internal circuit being
affected.
•
Don’t use abrasive cleaning solvents to clean the device.
•
Do not expose the device to extremely high or low temperature as this will shorten the life of electronic
devices, destroy the battery or distort certain plastic parts.
•
Don’t dispose of the device in a fire as it will result in an explosion.
•
Don’t expose the device to contact with sharp objects as this will cause scratches and damage.
•
Don’t let the device fall on the floor. The internal circuit might get damaged.
•
Don’t attempt to disassemble the device as it may get damaged if you are not professional.
Package Contents
•
Universal Car Vent Holder with Wireless Charger
•
USB cable
•
Instruction Manual
