Instruction Manual
7
3.
The temperature can be set in three increments from 165
℃
, 185
℃
or 205
℃ by pressing the
buttom for temperature adjustement
. The thicker your hair the higher the selected
temperature can be. Chemically-treated hair should be straightened at a lower level.
4.
The temperature indicator light flashes as long as the appliance is heating up. As soon as the
flashing goes out, the desired temperature is reached. It takes 57secs to reach 165°C, 1.14min
to reach 185°C and 1.30secs to reach 205°C.
5.
Divide the combed hair into small strands that should not be wider than five centimetres. If
necessary separate the hair strands with a bobby pin.
6.
Place a strand of hair on the hair placement surface between the two straightening plates, close
the appliance and move the appliance slowly and uniformly downward to the tips of the hair.
In this process always keep the firmly appliance closed. You should never keep the appliance
longer than two seconds at any point, so as not to damage your hair. If you want to get a
smooth, tight-fitting look, when smoothing the hair strands you must always work close to the
head. However if you lift the appliance when straightening you get a lot of volume.
7.
Repeat the operation as often as needed.
8.
The charge status indicator informs you of the actual charging status of the appliance Indication
occurs at 25%, 75% and 100%. If all three displays are flashing the appliance can no longer be
used until it has been recharged.
9.
Temperature locked function: pressing two buttons at the same time, the temperature is
locked; Pressing again together, it is unlocked. If it has no power when the temperature is
locked, charging can be unlocked.
10.
Switch off the appliance via the button and let it cool down before putting it away for
safekeeping. To protect the smoothing plates from being opened unintentionally, press the
button for the safety locking mechanism again.
11.
TIP: You can also style waves with the hair straightener! Place the strands of hair in the hair
straightener as usual and straighten the hair. Just before reaching the tips of the hair, turn the
appliance with the inserted strand of hair, inward or outward (depending on the type of wave
desired) to produce a gentle curl in the hair.
Note: The appliance is delivered without plug-in power supply/USB charger. However, to charge the
appliance it must be connected to the mains supply via a USB charger. In this regard the following
instructions for dealing with electricity apply:
CHARGING
1. Ensure that the appliance is switched off.
2. Ensure that the appliance is in a stable position.
3. Connect the changing cable on the charging connection of the appliance.
4. Connect the other end of the charging cable to a USB charger.
5. Plug the plug of the USB charging cable into an electrical outlet (Voltage according to type plate)