Instruction Manual
5
Clean all parts of appliance thoroughly before first use except the motor base. Rinse and dry.
Assembling / Disassembling:
1.
Attach the feeding chute to the base:
a.
Insert the feeding chute in the locking slot by aligning the lock pictogram and the
arrow.
b.
At the same time, press the button (on the appliance, next to locking slot) and rotate
the feeding chute anticlockwise until it
« clicks » into the locked position
.
2.
Insert the juicing screw in the feeding chute. Push it until it fits into the locking slot.
3.
Align the juice strainer with the juicing screw and push it through towards the
locking slot.
4.
Attach the pulp extractor to the feeding chute :
a.
Align the pulp extractor with the juicing screw, juice strainer and feeding
chute.
b.
Rotate the pulp extractor counter clockwise to align the "
"symbol on the
feeding chute with the "
"symbol on the pulp extractor.
5.
Place the juice cup below the juice tap.
6.
Place the juice cup under the pulp extractor, as close to the juice cup as possible.
7.
Put the top cover on the feeding chute.
IMPORTANT
: If the Juice bowl is not correctly assembled, the Juicer will not operate. This is a safety
feature.
