Instruction Manual
7
TRIPOD ASSEMBLING
1.
To Ensure stability of the Tripod base pull each leg outwards until it latches or clicks in place on the
Tripod bracket. Place the Tripod base upright on the floor.
2.
Loosen the height adjustment screw and insert the inner pipe to the tripod base.
3.
Slide the plastic ring onto the inner pipe from the bottom of the assembly. Fix it in place using the
screw. This prevents the inner pipe from being pushed out when adjusting the height.
4.
Attach the end cap to the bottom of the Inner pipe.
FAN GRILL ASSEMBLING
1.
Align the rear grill on the motor unit (with carry handle upwards) and screw in the 4 rear grill
screws to fix it in place.
2.
Place the fan blade on to the motor shaft and secure it using the blade screw.
3.
Hold the front grill against the rear grill making sure that the front name plate is horizontal secure it
together by snapping the grill clips into place.
4.
To finish assembly, tighten the grill locking screw at the bottom of the rear grill.
