Instruction Manual
6
USE
Insert plug to the electrical outlet, the LED indicator shows power on.
The function of the unit can be controlled via on board control panel or by remote.
ON/OFF button
•
Press the button the first time, the indicator "LOW" of control panel is working air cooler is working
with low speed.
•
Press the button the second time, the air cooler stop working.
Speed button (VITESSE):
Press this button to change the fan speed: low-medium-high speed.
Wind button (MODE):
Normal
Nature
Sleep
•
Normal mode: wind blow based on low/med/high
•
Natural mode: the wind imitates blow of natural strong and soft wind
•
Sleep mode: the sleep function operates at natural fan speed and slowly lowers the speed before
turning it off together.
Cooler button (FROID)
: Press the button one time: air cooler is working; indicator of control panel
lights up. Press the button second time to stop it.
Caution
: Please pay attention to the water level in the tank before activating the air cooler function.
Water should stay between Min and Max level. It is recommended to replace water in the tank at least
once in a week.
Swing button (OSC):
Press swing button to change the wind direction. The swing icon will appear
on the screen when the function is activated. Press the button again to stop the oscillation.
Timer button (TEMPS):
Set the operating time from 0.5H to 7,5 hours. Each pressure represents
30 minutes. Indicators on the control panel indicate the selected run time.
Ioniser (ION):
Press “Ion” button to activate the ionizer function. Indicator light will signify that
the ionizer is on as the negative ions releases. Ions attract harmful particles in the air such as dust,
pollen, mold, spores etc. to eliminate them and clean the air.
Remote
•
The remote control is supplied with 1 battery CR2025. Do not use other types of batteries.
•
In case of prolonged non-operation, remove the battery from the remote control.
