Instruction manual
6
USE
Remark:
You can use supplied plastic film of DOM421 or plastic bag but the width shall not exceed 28cm.
The plastic film has to present points or grooves on one of the both surfaces, a totally smooth surface
does not suit.
The thickness has to be 0,20mm, check too, please, the range of temperature for which the plastic film
or bag is designed (the ideal is from -20°C to +110°C).
If you use plastic bag, use special plastic bags to be used for all kinds of vacuum packing (vegetable,
meat, condiment, dried fish, biscuits…).
To make bags from the plastic film supplies:
1.
You can completely open the cover by pulling the both side locks, then you can use integrated
cutting blade to cut the special supplied plastic film at the size you want and to place it well on
the hot wire.
2.
Lower the cover and lock it by pressing on both side locks.
3.
Plug in the appliance.
Note: caution! Hot surface, do not touch the hot wire.
Make sure you give the appliance time to cool down. Wait at least 7 seconds between seals
4.
Press single seal button (“scellage”) and cover is lowered automatically, sealing progress light bar
allows you to follow the bag sealing.
5.
After sealing, cover is opened.
Lid lock
Control panel
