User manual
6
USE
1.
Plug the power cord into a standard AC electrical outlet.
2.
Press “ON/OFF” button, the product is working on 1200W, the three red lights on.
3.
Press “MOD” button to change the Fan mode – Regular Fan (three blue lights), Warm Fan (one red light),
Hot Fan (three red light)
4.
Press “TURN” button, the heater will turn automatically with an angle about 75
°.
5.
Press “+” or “-” button, setting the temperature you need
6. Press “MOD” button for 5 seconds, display shows timer, press “+” or “-” button to set the timer you need
to auto power off the heater (up to 9 hours), the display will shinning 3 times to finish the setting.
SAFETY TIP-OVER SWITCH
The appliance is fitted with a tip-over switch. When you use the appliance in an upright position on
a flat and stable surface, the tip-over switch will be on. In the event the heater is knocked over, The
heater will stop heating immediately when heater fall down, but the fan will keep running 30seconds
to make the hot air out from the heater. After 30seconds the fan stops and the heater stop totally.
OVERHEAT PROTECTION
The heater is fitted with a safety device which will switch off the heater in case of accidental overheating
(eg. Obstruction of air intake and outlet grilles, motor turning slowly or not at all) . To reset, disconnect the
plug from the power for approximately 10 minutes, remove the cause of overheating then plug the
appliance in again.
CLEANING
Before cleaning always turn off the appliance, unplug it and let the appliance to cool down.
To remove dust from the appliance, use dry cloth or vacuum cleaner.
STORAGE
Store the appliance in a cool and dry place. Do not throw away the gift box. You may use it to store
the appliance in summer time.
