Instruction manual
6
Put the sharper side upward and move the edge upward along the
incline of the
groove, pull out the scissor when it get contact with the grinding
wheel, repeat 4-5times.
Can slightly adjust the angle between the scissor and the incline
according
to the thickness and size
Sharpen the other edge in the same way.
Turn off and cut off the power
Clean the table and the appliance, finish sharpening
How to sharpen the screwdriver:
Connect with power and press the switch
Hold the handle of the screwdriver
Put the head of screwdriver into “V” groove, and move downward to
contact with the grinding wheel to amend two surfaces.
Turn off and cut off the power
Clean the table and the appliance when finish sharpening.
Attention:
-
When the knife/ scissor/ screwdriver blocks the grinding wheel and
the wheel does not run, must take out the knife and do not sharpen
the knife until the appliance run
normally, otherwise it will be damaged
easily.
-
After 2 minutes each use, let the appliance cool down for 20 minutes.
How to use the auto re-winded function
-
Pull out the cord to suitable length and plug it with the outlet when use.
-
Unplug from the outlet first and then press the cord button after use, the
cord
will return back automatically; If the cord can’t return, then hold the cord and
press the button, the cord will rewind slowly.
Attention: when the cord is pulled out completely, do not pull anymore.
