Instruction Manual
5
DESCRIPTION
1. FRONT PROTECTION
2. BLADE
3. ASSEMBLING SCREWS
4. REAR PROTECTION
5. MOTOR SHAFT
6. MOTOR
7. OSCILLATION SWITCH
8. SPEED CONTROL
9. LOCKING SCREW
10. PIPE
11. BASE
12. BASE LOCKING SCREW
13. GRILLE LOCKING SCREW
14. BLADE SCREW
TECHNICAL SPECIFICATIONS
Voltage:
220-240V~ 50Hz
Power:
35W
3 speeds
Assembly
Fan Grill Assembly
1.
Fasten the rear grill (4) onto the motor (6) with four screws (3).
2.
Install the Blade (2) onto the Motor Shaft (5) by tightening the blade screw.
3.
Centre the Front Grill by aligning the logo on the grill Hub so it is horizontal and parallel to the floor. Then secure the Front (1) and
Rear (4) Grills completely together by snapping grill clips into place. Lastly, tighten the grill locking screw (13) at the bottom of the
Rear Grill.
Body Assembly
1.
Unscrew Base Locking Screw (12) from the Pipe.
2.
Insert the Pipe (10) through the hole in the center of the Base and twist into position.
3.
Tighten the Base by Base Locking Screw.
4.
Unscrew the Locking Nut from the Fan Head.
5.
Put the Fan Head into the Pipe, and using the Screw to tighten the Fan Head and the Pipe.
