Instruction Manual
15
Pin or blow the ribbon of the zipper and place it under the foot. Pull threads backwards and lower the foot. To sew the
left side of the zipper, guide the zipper teeth along the edge of the foot and sew the garment and zipper tape.
Invert the fabric and sew the other half of the zipper in the same way as the left side.
To sew past the zipper tab, lower the needle into the fabric, raise the presser foot and push the zipper tab behind the
presser foot. Lower the foot and continue to sew. It is also possible to sew a length of cord into a bias strip to form a
"welt" or piping
THREAD TENSION ADJUSTMENT
It requires a slight adjustment to the thread tension due to different sewing texture’s flexibility, texture material,
sewing thickness, and texture layers. The thread tension adjustment wheel (8) is used for adjust thread tension.
For a correct stitch the upper and the lower thread should be even. By turning the thread tension dial the upper
thread can be switched from the left to the right. Use this dial to get the two threads even.