User manual
5
5. Assemble the filter holder with the filter inside, but do not add any coffee. Make sure it is properly
locked into place.
6. Place the cup under the coffee outlet nozzles.
7
. Plug in appliance.
8. Set the On/off switch to the on position and turn it on. The power light indicator will start blinking red
and the machine will start heating. Once it has finished heating, the red light will turn steady.
9. Slide the coffee switch upwards, the machine will start dispensing hot water. Slide it downwards to stop
water from coming out. It will not stop automatically.
10. Once water has stopped being dispensed, remove the water tank, rinse it and clean the cup used. The
coffee machine is now ready to use.
Note: if you want to carry out a more thorough cleaning cycle of the inside parts of the appliance, use a
1:4 solution of vinegar and water, or use descaling product.
USE
Filling the filter with coffee
1.
Insert the filter in the filter holder.
2.
Fill the filter with ground coffee.
3.
Make sure the coffee introduced does not exceed the filter’s edge.
4.
Use the measuring spoon and coffee press to press coffee down, add coffee if necessary and press it
down again.
5.
Remove excess coffee from the filter’s edge to ensure easy assembly of the filter holder in the unit
and to ensure good operation.
Note:
pressing coffee down is a very important part of brewing coffee
.
Installing the filter holder
1.
Rotate the filter holder to the left to remove it.
2.
Choose the desired filter: coffee filter (9) or biggest coffee filter (13)
The (13) coffee filter will require a greater amount of coffee.
3.
Follow the above steps to fill the filter with coffee.
Note:
Use freshly ground coffee to obtain best results.
4.
Assemble the filter holder back in the appliance by rotating it to the right until it fits into the
lock position.
