Instruction Manual
6
3.
Never place any object on the unit that could interrupt the air flow and affect its proper
operation.
Using the appliance
1.
Connect the mains plug into an earthed wall socket.
Note:
We recommend that you preheat the appliance before adding the ingredients by setting the timer
button to 3 minutes. Then wait until the heat indicator light goes out (about 3 minutes). Then place your
food in the frying basket and set the desired temperature and cooking time.
2.
Carefully remove the frying basket from the appliance.
3.
Place the ingredients in the basket.
Note:
Ingredients must not exceed the MAX mark or the quantity indicated in the corresponding table (see
chapter "Settings"), as this may affect the cooking of the food. DO NOT FILL THE FRYING BASKET WITH OIL
OR ANY OTHER LIQUID.
4.
Slide the pan back into the air fryer. Never use the pan without the basket in it.
5.
Adjust the cooking time and temperature required. The green operating LED should light up.
Note
: When setting the timer, always add an extra minute or two to the cooking time to allow the fryer to
warm up.
6.
When the appliance has reached the set temperature, it interrupts the temperature rise of the
basket. The red cooking indicator goes out to signal the end of the heating process. When the
temperature inside the fryer decreases, the fryer will then be switched on again to maintain the
desired temperature.
Note
: There are some ingredients that you may need to shake halfway through the firing cycle. To do this,
pull the frying basket out of the appliance by the handle. The air fryer will automatically shut off. Then the
fryer will resume the cooking cycle once the basket is inside. While food is cooking, excess oil is collected on
the bottom of the fryer drawer.
7.
When you hear the timer ring, the cooking time has elapsed. Remove the cooking tank from the
appliance and place it on a heat-resistant surface
Note
: You can also stop the firing manually. Set the timer setting knob to 0.
8.
Check if the ingredients are cooked. If you wish to extend the cooking time, put the cooking tank back
into the appliance and set the timer for a few more minutes.
After frying, the cooking tank and the ingredients are still hot. Depending on the different ingredients, hot
steam may escape from the cooking tank.
9.
Empty the ingredients from the frying basket into a plate or bowl.
Advice: You can use tongs to remove large or fragile ingredients from the basket.
