Instruction manual
5
Preparation before use:
- pre-heating the appliance 15 minutes without any food.
A small smoke emission is normal; take care that
the room is aerated well
- Ensure the controller is in the “OFF” position before plug in.
Place the device on a flat, stable, heat-resistant surface
USING YOUR APPLIANCE
1.
Connect the appliance to the power supply. Turn the switch from “OFF” TO “ON” position for working,
then pre-heating the appliance for 8 minutes.
2.
As the different heat of cooking request, put your food on the pans then place them under the heating
sources. Or place your food directly on the cooking plate for the purpose of grilling.
3.
After use, turn the switch to “OFF” position and unplug it from the socket. Wait until the appliance is
completely cool down before moving or cleaning.
NOTE:
Don‘t leave the 2 pans in the appliance if they are empty.
Never cut food on grill plate.
Use a wooden or plastic spatula to touch the food.
CLEANING AND STORAGE
Caution: do not use wire brush or any abrasive items or liquids.
Be very careful when you use cooking oil, overhead oil could ignite and start fire.
1.
Always remove the plug from the socket before cleaning the appliance and ensure that it has cooled
down to room temperature.
2.
Never immerse the appliance base in water
3.
Ensure that the appliance has completely cooled down.
4.
Clean the accessories with hot soapy water.
5.
Use damp cloth to clean the appliance base.
6.
Do not use dishwasher
