7
Slim model
Step 1
:
1. To install onto the wall drill 2 holes of Ø8mm on a suitable place according with the centre distance
of hole in the back of the cooker hood.
2. To insert the nut into the holes.
3.
To insert the screws into the nuts and tight. Put the cooker hood onto the tighten screws.
4. To fix the cooker hood with safety screw. The two safety vents are positioned on the back casing,
with diameter of 6mm.
5. To put the one-way valve onto the cooker hood.
Step 2
:
1. To drill 4 holes of 6mm diameter at the bottom of the hanging cupboard.
2. To put the one-way valve on the cooker hood, then install the cooker hood on the bottom of the
cupboard, tighten the hood with enclosed 4 screws.
3. To install the adjusted board on the bottom of the hood in order to keep out the gap between hood
rear and cupboard.
