Living Well MWBLND01 Instruction Manual Download Page 7

The Blender is designed to automatically turn off if it begins to overheat.  If this 

occurs, follow these steps:

• Power off and unplug your Blender for at least 60 seconds to allow it time to 

reset itself.

• If after 60 seconds your Blender will not turn back on, power off and unplug 

again. Remove Pitcher and use a blow dryer on cool setting to blow air into 
the blade area and underneath the Base of your Blender. 

 

 Cleaning and Storing Blender:

  

Before using your 1200W Emulsifier/Blender for the first time, please follow 
the Care and Cleaning Instructions below.

 

• Remove unit from packaging, discard any packing material, and 

review all warnings and instruction manual in its entirety. 

Cleaning Pitcher Lid, Pitcher Lid Plug, Personal Cup Lid, and Plunger:

• Separate the Lid Plug from the Lid. 
• Wash all parts with warm, soapy water. 
• Rinse thoroughly with water and dry.  

Cleaning Pitcher and Personal Cup:

• Assemble unit according to diagram and instructions. 
• Fill the Pitcher half full with warm water and a small amount (a couple drops) 

of mild liquid soap.  

• Ensure Lid and Lid Plug are securely in place. 
• Press the Smoothie/Clean button.
• Let Clean cycle run completely (60 seconds)
• When finished and Blades are completely stopped, remove Pitcher Pour out 

water.  

• Rinse Personal Cup and Personal Cup Blade thoroughly with water and dry. 
• Personal Cup Lids may be washed by hand with mild soap and sponge.  
• Personal Cup Blade, Sports Lids and Personal Cup are also (top shelf) 

dishwasher safe. 

• Ensure all parts are clean and dry before storing at room temperature.

Cleaning Blender Base:

• Power off the Base, remove Pitcher/Personal Cup and unplug.
• Use damp cloth with mild soap to clean the Base.  
• Wipe down with damp cloth and water. 
• Dry completely.  
• Do not oversaturate or immerse in water. This will cause damage to the unit 

and possible injury to yourself and surrounding areas. 

•  Do not use scrubber or wire bristle brushes on any parts of the 1200W Emulsifier/Blender.  This can cause damage 

to the unit and make it malfunction.  

•  Use caution when washing and drying Blades on the Pitcher and Personal Cup.  They are extremely sharp and can 

cause injury if not handled properly.  

 

Storing your 1200W Emulsifier/Blender:

 

Summary of Contents for MWBLND01









Reviews: