Living Water St. Lucia Series, Owner'S Manual

Page: 33 / 50

For HELP, call In-Touch
™
at 727.490.5353
Page 31
MESSAGE MEANING ACTION REQUIRED
dr Inadequate water, poor flow, or air
bubbles detected in the heater.
Hot tub is shut down for 15
minutes. Check the water level and add water if
necessary. Be sure that slide-valves are
open. Make sure the pump is primed and has
power. Press any button to reset
(automatically reset within 15 minutes). If the
problem persists, contact service.
drY
dy
Inadequate water detected in
heater. Displays on third
occurrence of "dr" message. hot
tub is shut down. Check water level in hot tub. Add water if
necessary. Be sure that slide-valves are
open. Make sure the pump is primed and has
power. Press any button to reset.
Pr When your hot tub is first
activated, it goes into Priming
mode. The Priming mode runs for up to four minutes
and then the hot tub begins to heat and
maintain the water temperature in Standard
mode.
- - F Temperature unknown After the pump has been running for two
minutes, the temperature will be displayed.
- - C Temperature unknown After the pump runs for two minutes, the
temperature displays