Living Spaces Judith Day Bed Assembly Instructions Download Page 2

Page: 2 / 4

CONGRATULATIONS ON YOUR NEW BED PURCHASE

~Warning

：

do not move bed after final assembly as it may result in damages to floor and/or bed.~

Hardware included in rail’s carton to attach storage and support system.

Step#3

Verify Euro Slats System Tension Slats are installed curved upwards per diagram.

Step#4

Attach side frame to back frame and front board using Wrench(I), Bolt (B1) and Washer (E).

Judith Day Bed Assembly Instructions

Φ8 MM

Center support rail

Side support rail

Slats

Storage

support rails

End clip

Bracket

1PC

13PCS

4PCS

26PCS

3PCS

2PCS

*Bolt B1 and Washer E

are factory installed*

Summary of Contents for Judith Day Bed

Page 1: ...ort rails O1 to Arm using Wrench I Bolt B and Washer E factory installed Attach side support rails O to Arm using Wrench I Bolt B and Washer E factory installed Attach bracket U to connect Arm and Bac...

Page 2: ...Step 3 Verify Euro Slats System Tension Slats are installed curved upwards per diagram Step 4 Attach side frame to back frame and front board using Wrench I Bolt B1 and Washer E Judith Day Bed Assembl...

Page 3: ...full length wooden side support cleats flat side facing up Verify the wooden support rails are installed properly into support cleats Step 6 Put the storage board S S1 on wooden support rails per dia...

Page 4: ...LATIONS ON YOUR NEW BED PURCHASE Warning do not move bed after final assembly as it may result in damages to floor and or bed Step 8 Insert Roll the Storage under the bed Judith Day bed Assembly Instr...