Take away the lava stone from the package and pour
the lava stone into the fire pit. Evenly distribute the
lava stone in the fire pit, so that the burner is
completely covered.
**DO NOT COVER THE IGNITION SCRREN
when placing the lava stone into the fire pit. Always keep ignition
screen visible.
See WARNING and Figures:
WARNING
Screen
This screen must be clear and free of obstructions at
all the times to ensure proper operation.
DO NOT PLACE LAVA STONES
ON THE SCREEN. KEEP
SCREEN CLEAR
WARNING
Th b
f th fi
it
t b
d b l
5
5/7
The burner of the fire pit must be covered by lava
stone completely.
Otherwise the flame may be extinguished. See the Figure
for the CORRECT and INCORRECT ways for reference.
CORRECT
INCORRECT
TIPS: Before Starting
• Read the instructions thoroughly.
• Check and make sure that all parts are present.
• For future reference, save this instruction manual.
TO LIGHT
Before each use, inspect the hoses. Replace hose if there are any signs of cutting, wear or abrasion.
1.Push and slowly turn the control knob to the HI position.
Perform leak test in a well-ventilated area outside and where no source of spark can occur.
Remove battery from igniter. Open tank valve fully (counter-clockwise). Turn the on/off valve at the unit to the “OFF” position to
pressurize the hose assembly. Use a soapy water solution to check all the connections for leaks before attempting to light the appliance.
If a leak is found, turn the tank valve off and do not use the appliance until repairs can be made
2. Hold the igniter to light the burner, release control knob after 45 seconds.
5/7
