AIR MASSAGE
Description
Standard Function
The Air Massage has three massage modes and four controllable zones. Each zone
can be turned on or off, and will disable that zone for each massage mode. If all
zones are turned off, the Air Massage will turn off.
The Air Massage is started by pressing the PWR button. The four numerical
buttons, the MODE button and the PWR button will be lit for the start of the Air
Massage. Pressing a numerical button will un-light the numerical button pressed and
turn off the corresponding zone.
While the Air Massage is active, it can be turned off at any time by pressing the
PWR button.
The Air Massage mode can be changed by pressing the MODE button. There are
three massage modes: Alternate, Pulse, and Wave. The Air Massage will always
start in the Alternate mode.
Each massage mode is indicated by the MODE button color. Alternate is Red, Pulse is
Green, and Wave is Blue.
Pressing the numerical buttons or MODE while Air Massage is not active will not cause
the system to respond. Air Massage must be active for the numerical buttons and MODE
button to control the system.
The Air Massage has a built in 30-minute timer. After 30 minutes the Air Massage
will turn off and the Hand Control buttons will be un-lighted. Pressing a numerical
button or the MODE button will reset the 30-minute timer.
Note
Using the Lumbar function will stop all other massage features. If the massage
feature is running and either Lumbar button is pressed, the massage will stop.
Massage can be re-enabled when Lumbar buttons are not pressed.
Hand Wand Manual
