SECTION 3 : INSTALLATION
Moving Your Table
•
To avoid damage to your Nuage
™
table, it is very important that it only be lift ed from
certain positi ons on the table (table edges marked with ARROWS below)
•
You may need to plug in your table and raise the table, the back secti on, and/or the leg
secti on for easier access to the base for lift ing purposes.
•
Lift your table by grasping fi rmly from the bott om of the frame. Do not try to lift from the
fi ns on the Cuvee cabinet or the cabinet doors.
Nuage Cabinetry Models
Nuage Pedestal Models
Nuage Vector Models
Your Nuage
™
table comes completely assembled and ready to use.
Ensure you read and follow the unpacking instructi ons included with your shipment.
If you did not receive unpacking instructi ons, please contact L
∙
E
∙
C customer service before
unpacking your table.
Once the table is unpacked, follow the “Moving Your Table” instructi ons below.
Basic Setup Instructions
Once your Nuage
™
table is positi oned for use, follow these steps:
•
Plug the power cord into a grounded outlet that is properly rated for the table.
•
Arrange and secure the power cord so it will not create a tripping hazard.
•
Place the hand and foot controls in locati ons where they are safe and accessible.
•
Ensure the controls are not in danger of being crushed by the lift or ti lt mechanisms.
•
Follow the “Leveling Your Table” instructi ons on the next page.
6
Your Nuage table is very heavy - extreme cauti on should be used to avoid
injury to yourself, others around you, and your table. DO NOT lift or move
without using proper safety procedures/equipment. DO NOT turn the table
on its side for any reason.
