LOCATION AND SAFE USE OF YOUR
ELECTRIC BLANKET
Location and Use
Use the blanket as an under blanket only. This blanket is designed for
domestic use only.
Ensure that you have read all the safety instructions carefully before use.
Fitting
Place the blanket over the bed, with the controllers at the pillow end,
ensuring that the blanket heating wires do not overhang the bed edge and is
not in the area of any intended pillow. Carefully fit the blanket to the bed.
Secure each corner and also the middle.
WARNING! The blanket must be securely in place.
WARNING! The cord and control must be outside the bedding at all
times and away from other heat sources such as heating and lamps.
Controls.
The controller has the following settings. Warning! Ensure heat control is
correctly attached before connecting to the mains supply. Input plug and
connecting socket must be secured and locked under the locking flap.
0 OFF
1 LOW HEAT
2
MEDIUM HEAT
3
HIGH OR PRE HEAT.
0 OFF
WARNING! Use HIGH setting to pre heat the bed 1 or 2 hours before
use only.
WARNING! DO NOT sleep with the control set to this setting (HIGH).
Operation.
Caution. This blanket should be used to heat the bed before sleeping. It is not
recommended to sleep on any electric blanket whilst heating.
Once the electric blanket has been installed correctly in position and the
bedding completed, connect the controller supply plug to a suitable power
outlet. Ensure the controller is set to ‘Off’ before plugging in. Select the
desired heat setting on the controller. The indicator lamp indicates that the
blanket is ON.