background image

2. Plug the power cord into the outlet.

3. Set color control knob to your desired color. There is 9-position level, the lowest is

white and the highest is puce. The bread slice can be toasted to golden color at the position

of “5”.

Note

: 1) Toasting color for one side is darker than that for double bread at the same level.

2) If toasted continuously, toasting color for the latter bread is darker than the color

of previous cycle at the same level.

4. Press carriage handle down vertically until it is positioned in place, the indicator of

Cancel

will be illuminated, and toasting begins. Once the bread has been toasted to the

preset color, the carriage handle will be automatically sprung up, and you can remove the

bread readily.

Note:

The carriage handle can only be latched when the appliance connects to the power supply.

5. During the toasted process, you may observe the toasting color. If it is satisfactory, you

may interrupt the toasting process by pressing the

Cancel

button at any time.

6. If the bread has been taken out from refrigerator. Set color control knob to your desired

color. Press carriage handle down vertically until it is positioned in place, then press

DEFROST

button and the indicator of

DEFROST

will be illuminated. In this mode it

will be toasted to your desired color.

7. If you want to reheat the cold toasted bread. Press carriage handle down vertically until

it is positioned in place, then press

REHEAT

button and the indicator of

REHEAT

will

be illuminated. In this mode toasting time is fixed, so long as time is running over, the

carriage handle will automatically spring up and end up the reheating process.

CAUTION:

1. Remove all protective wrapping prior to toasting.

2. If toaster starts to smoke, press

Cancel

button to stop toasting immediately.

3. Avoid toasting the food with extremely runny ingredients such as butter.

4. Never attempt to remove bread jammed in the slots without unplugging the toaster from

the electrical outlet first. Be sure not to damage the internal mechanism or heating

elements when removing bread.

5. The bread slot is only applicable for toasting regular bread slice.

0800 422 274

 

NZ

Summary of Contents for LT2S7









Reviews: