4
CHARGING
1. Invert the base of the product to expose the underside.
2. Remove the rubber cover / plug over the charge port connector.
3. Carefully insert the charge lead connector, ensuring correct
orientation. NOTE: DO NOT force the connector to make
fitment, if more than a gentle force is required to be applied
then the connector / charge port may be incorrectly orientated,
try repositioning 180degrees.
4. Connect the USB portion of the charge lead to a standard
USB outlet (external power source / laptop etc).
5. If connected correctly, the red indicator light will flash on/ off.
Charging will take 3 – 4 hours. The indicator light will stop flashing
once the battery is fully charged.
6. Please ensure that the night light is disconnected from the power
source /charge lead once fully charged.
INSTRUCTIONS FOR USE
1.When using the night light for first time, please ensure it reaches full
charge, approximately 3-4 hours.(See CHARGING section on
previous page).
When fully charged, the night light will run for approximately 15 hours
on warm white and approximately 12 hours on one of the variable
color lights.
2.
Power switch: Press the power button on the base of the light,
the warm white light will turn on automatically.
3.
LED color modes: the warm white light will turn on when the power
button is pressed (as above). Pat the bottom of the night light once to
switch to the color changing mode, the color will gradually change
every 3 seconds. To choose one color to stay on, wait for the desired
color and pat the bottom of the night light once more, the color
changing will stop. Pat the bottom of the night light once more to turn
off. To turn the warm white light on again pat the bottom of the night
light to recommence the above cycle.
