Living & Co KE01403-GS, Instruction Manual

Page: 5 / 8

5
NOTES :

Ensure that switch is free of obstructions and the lid is firmly closed, the kettle will not turn off if the
switch is constrained or if the lid is opening.

Lift the kettle from the power base and then pour the water.

Take extreme care when pouring the water from your kettle as boiling water can scald

Do not open the lid while the water in the kettle is in operation or still hot.

The kettle will not re-boil until the switch is pressed again. The kettle may be stored on the power
base when not in use.

Always disconnect the power supply when not use.
BOIL-DRY PROTECTION
Should you accidentally let the kettle operate without water, the boil-dry protection feature
will
automatically switch off the supply power. If this occurs, allow the kettle to cool prior to filling with
cold water before re-boiling.
5

Position the kettle on the power base.

Connect the plug into a power outlet. Press down the boil switch and the indicator will illuminate,
the kettle will then start to boil the water. The kettle will switch off automatically once the water
has boiled. If immediate re-boil is required, it may take 30 seconds before the switch can be reset.
You may switch the kettle off by lifting the boil switch up or directly lifting the kettle from the
power base at any moment to stop boiling process.
OPERATION (Continued)