9
3.3 Reversing the Door Swing
This bar fridge can be opened from either
side to suit your individual installation
requirements. If you want to open the door
from the other side, follow the instructions
below and on the following pages to reverse
the door swing.
Tools required:
Phillips head screwdriver, flat-
bladed screwdriver, hexagonal spanner (8mm)
Help required:
We recommend you ask
another person to help you during assembly.
• WARNING! Ensure the fridge is empty
and disconnected from power supply.
• Keep all parts you remove for re-
installation of the door on the other side.
• Tilt the appliance slightly towards the back
and prop it up securely on something
solid so that it will not slip during the door
reversing process. Do not lay the unit flat
as this may damage the coolant system.
1). Remove the upper hinge cover (plastic)
by using a flat-blade screw driver to lever
it off. Remove the upper hinge screws and lift off the metal hinge. Remove the plastic
screw hole caps from the other side (Fig 1), again using a flat-blade screw driver to
lever.
2).
The door can then be removed (lift off the lower hinge support). Unscrew the bottom
hinge assembly and leveling feet. Assemble the bottom hinge assembly and leveling
feet on the opposite side.
3).
Place the door on the bottom hinge and assemble the upper hinge, upper hinge
cover and the plastic screw hole caps successively.
3.4 Adjustment of the Leveling Feet
To adjust the height of the
front of the refrigerator, use
the adjustable leveling feet:
1). Turn the feet clockwise to
raise the front.
2). Turn the feet counter-
clockwise to lower
the fridge.
3).
Adjust both feet until the
fridge is stable and level.
Fig 1)
Fig 2)
Fig 3)
