CARE FOR YOUR HAIR CLIPPER SET
CLEANING AND MAINTAINING
AFTER EACH USE.
1. Turn the hair clipper off.
2. Gently brush the remaining hairs away/rinse under warm
water from the guide comb and trimmer blade.
CLEANING WARNINGS
•
Only the guide comb attachment and trimmer blade may be
removed from the product for cleaning.
•
Cleaning should only be done with a soft brush, such as the
brush supplied with the product.
•
Only use the light-grade oil supplied or sewing machine oil on
the blades.
•
Do not use harsh or corrosive cleaners on the units or their
blades.
•
Do not submerge in water as damage will occur.
STORAGE
•
Always store this appliance and power supply in a moisture-
free area. Do not store it in temperatures exceeding 60
℃
.
TRIMMING THE NAPE OF YOUR NECK(Fig.3)
NOTE:
You will need a hand mirror for this operation if performing it
alone.
Before you begin, attach the full size Trimmer Blade.
Use your fingers to lift the hair at the base of your head up.
Your index finger should be covering the roots of the hairs you are
lifting to prevent accidental removal by the clipper.
Using your other hand, hold the clipper to the base of your neck with
the cutting unit facing up, and move the clipper up the length of the
neck until it touches your finger covering the hair roots at the base
of your head.
Be sure to move the unit slowly when performing this operation and
to keep the hair roots at the base of your head out of the way of the
trimmer.
To trim in the most effective way, move the appliance slowly against
the direction of hair growth (Fig.4).
To trim the body hair with positioning comb if you want to keep a
length, as picture shows. (Fig.5)
To trim the detailed beard and moustache with guide comb, as the
pic shows. (Fig.6)
ATTACHING & REMOVING THE TRIMMER HEAD
NOTE:
Always ensure the clipper is switched off before changing
any attachments.
To remove, hold the clipper with one hand and turn the trimmer
head anticlockwise with the other.
5
1300 886 649
AU
2
130 0 886 649
A U
130 0 886 649
A U
