Operation Instructions
NZ
SALES
AFTER
SUPPORT
0800
422
274
8
Switch On / Switch Off The Unit [ Power button ]
When the machine is in standby mode, the on/off inicator will flash slowly.
Auto Shut-off Timer Function [ Timer button ]
Humidity Setting [ Up and Down buttons ]
Press the humidity setting buttons to select your preferred humidity from CO-30%-35%-40%-45%-
50%-55%-60%-65%-70%-75%-80%-CO. CO means continuous dehumidifying regardless of
ambient humidity.
(2S)
(2S)
(2S)
Connect to the power supply and press the power button once to turn on the unit, the unit runs by
default mode on manual continuous dehumidifying with low fan speed.
Press the power button to turn the unit off, the fan will continue to operate for a few seconds to
blow out the hot air inside the unit.
Press the timer button, then press up/down buttons to select your preferred number of hour from 00-24-00
The appliance will shut off automatically once the selected number of hours is reached.
Auto timer function will be canceled if
the timer button is pressed twice in 5 seconds.
Auto timer function will be canceled if the appliance is switch off and on again.
