Operation Procedure
NOTE
This appliance will automatically turn off after approximately 15 minutes of operation.
DO NOT
use for more than 15 minutes at a time without a 30 minutes cool down period in
between.
This should not be considered as a substitute for manually turning off your appliance.
Always remember to turn off and unplug when not in use.
Power Adaptor
Before first use, please read the Instruction Manual carefully.
Insert the small plug end of the power adaptor into massager as shown.
Plug the power adaptor end into the power point and switch on.
The appliance is now ready for use.
4.2 Preparation
Place the massage seat on a chair and attach it by means of the fastening strap on the back.
4.3
Massage Control Operation
Press the ON/OFF button to power the massage chair cushion on/off
4.4
Massage Areas
Massage areas: full back massage, lower back massage, upper back massage, select the desired
function by pressing the relevant button (as referenced on Page 5).
4.5 Heat Function
Press heat button to switch the heating function on/off.
4.6
Vibration Massage for the Seat
Press vibration button to turn the seat vibration massage motors on/off.
NOTE:
The massager / Heat will automatically turn off after approx. 15 minutes, or
alternatively, you can manually turn off before the 15 minutes has passed
2
130 0 886 649
A U
