background image

Instructions for Use 

Before First Use 

Before using the vacuum cleaner for the first time, clean the exterior surface with a soft, 

damp cloth and dry thoroughly. 

Do not immerse the vacuum cleaner in water or any other liquid. 

Charging 

Before first use, the vacuum cleaner must be charged for approx. 5 hours. Subsequent 

charging times will vary dependent upon use. If the vacuum cleaner battery becomes 

drained completely during use, it may take up to 

6

 hours to fully recharge.

The battery pack must be fitted onto the vacuum cleaner main unit during charging; 

do not charge the battery pack separately. 

STEP 1: Before connecting to the mains power supply, attach the battery pack by 

aligning it with the main unit and sliding into place until it clicks. 

STEP 2: Connect the mains power adaptor to the charging port on the battery pack. 

STEP 3: Plug the mains power adaptor into the mains power supply; the LED indicator light 

will flash during charging and then remain illuminated once the battery is fully charged. 

STEP 4: Unplug the mains power adaptor from the mains power sup�ly once the battery

is fully charged. Disconnect the mains power adaptor from the charging port on the 

battery pack. 

Note: Whilst charging, the battery pack may become warm. 

Warning: Do not use any mains power adaptor other than that 

supplied. Using an alternative will increase the risk of damage to 

the appliance or injury to the user. 

Using 

STEP 1: Check that the vacuum cleaner is disconnected from the mains power adaptor 

after unplugging it from the mains power supply. 

STEP 2: Turn on the vacuum cleaner by pressing the power trigger; press once for the 

minimum power setting, press twice to use the maximum power setting. 

STEP 3: To turn off the vacuum cleaner, press the power trigger. 

Warning: Do not use the vacuum cleaner without the HEPA 

filter and filter cone in position. The dust container must be 

closed before use. Clean the HEPA filter regularly to preserve 

the suction of the vacuum cleaner. 

7

Summary of Contents for BC-8830
















Reviews: