Safety Information
To ensure safe operation of the FaultChaser, follow the instructions carefully and
observe the warning and caution messages listed in Table 3. Failure to observe
warnings can result in severe injury or death and can damage the unit.
Table 3
. Safety Information
Notification
Definition
The FaultChaser is designed for use on cabling systems with or without
voltage.
•
The Voltage! Icon turns on when the voltage exceeds Safety Extra
Low Voltage (SELV) rating of 60 Volts peak AC or DC.
•
Internal components are protected up to 400 Volts peak AC or DC.
•
Operating the FaultChaser when a voltage source exceeds 60 volts
peak AC or DC may pose a safety hazard for the user.
Do not place equipment and its accessories in the trash. Items must be
properly disposed of in accordance with local regulations.
It is not recommended to use the FaultChaser when the Voltage! Icon is
present.
6
