Version 7.0
8
The last step is to perform the verification setup. This is “
Step 5 Verify Setup
” in our configuration folder on servers
running software 6.5.0 or below. Press “
Enter
” while hovering over “Yes”
This will check if the server can reach google, our hubs, LUC, check the S&F port, Preview Port, Medic, and lastly the UDP
ports for each instance setup in the chart earlier. You should see a “
SUCCESS
” at the bottom and get an “
All tests
passed
” message.
You will then receive a wizard complete message. To finish the installation press “
Enter
” on your keyboard.
The basic configuration for the server is complete
. If you made a mistake or want to configure a few additional settings
please see the next page for the “Advanced Configuration” Setup.
