7/10
CHAPTER 3: ENGINEERING MODE
3.1Engineering Mode
1)
To enter Engineering Mode, press & hold the resistance UP and DOWN keys (Figure B) at the same time for 3-5
seconds until Engineering Menu appears on the display.
2)
Use the INCLINE and RESISTANCE UP and DOWN keys to select a parameter.
3)
Press ENTER to enter a parameter setting.
4)
Use the INCLINE and RESISTANCE UP and DOWN keys to change the parameter.
5)
Press and hold the STOP key to exit Engineering Mode and return to normal operation.
(
Figure B)
3.2 Engineering Mode Overview
MODE
Function
Description
ENG 0
Display
Test
Start Key - LED on
Stop Key - LED off
Any Other Key - Will show on the display window.
Hold the STOP key for 3 seconds to return to the Engineering Menu.
ENG 1
Hardware
Test
Resistance up-ECB counter up in resistance window
Resistance down-ECB counter down in resistance window
Heart signal in-display the heart value in heart window
RPM signal in-display the PRM value in RPM window
Hold “STOP” 3 sec back to Engineering Mode
ENG 2
Switch
Function
Use the INCLINE or
RESISTANCE
UP and DOWN keys to switch DEMO MODE off or on.
Use the START key to select unit (1=KM, 0=Mile).
ENG 3
Information
Accumulated Time and Distance
Press and hold the START key for 5 seconds to clear all data.
ENG 4
Incline test
Press ENTER – save the ADC value
Press INCLINE or UP and DOWN – change the incline value.
CHAPTER 4: ERROR CODE
There are no ERROR CODE define in this model.