5
CHAPTER 2: Engineering Mode
2.2 ENGINEERING MODE OVERVIEW
MODE
FUNCTION
DESCRIPTION
ENG 0
Display Test
Start Key – LCD/LED on
Stop Key – LCD/LED off
Hold the STOP key for 3 seconds to return to the Engineering Menu.
ENG 1
Hardware Test
Motor & Incline Motor Test.
ENG 2
NOT AVAILABLE
ENG 3
Switch Function
Use the INCLINE or SPEED UP and DOWN keys to switch DEMO MODE
off
or
on
(Demo on=1 & Demo off=0 on DISTANCE window).
Use the START key to select unit (1=KM & 0=Mile on TIME window).
ENG 4
Information
- Accumulated information(Distance&Time)
- Time window will show accumulated time.
- Distance window will show accumulated distance.
Software version
- UCB software version
- MCB version
ENG 8
Test
To Get to ENG 8 - Enter into ENG 3, the press and hold the SPEED UP and
INCLINE DOWN key at the same time for 3-5 seconds.
Press ENTER at
P1 - Select speed up rate (normal or quick).
Press ENTER at P2 - Hold the START key
to clear all data.
Press ENTER at P3- BURN ACCUMULATED
Press ENTER at P4- Enter into ERP
Ɉ
Ɉ
Ɉ
Ɉ
“START” key to save the change.
Ɉ
Ɉ
Ɉ
Ɉ
Demo off
-- console will display
Figure A
after remove the safety key;
Demo on
--60 seconds later after remove the
safety key, the console will enter into DEMO ON MODE. The LED and LCD will display in turns
(Figure B)
.
FIGURE A
FIGURE B