5
CHAPTER 2: ENGINEERING MODE
2.2 Engineering Mode Overview
MODE
FUNCTION
DESCRIPTION
ENG 0
Display Test
Start Key – LCD/LED on
Stop Key – LCD/LED off
Any Other Key - Will show on the display window.
Hold the STOP key for 3 seconds to return to the Engineering Menu.
ENG 1
Hardware Test
Motor & Incline Motor Test.
ENG 2
Auto Calibration
Digital MCB, not necessary to do Auto Calibration. If the START key is
pressed, the words “NO FUNCTION” will scroll on the screen.
ENG 3
Switch Function
Use the INCLINE UP and DOWN keys to switch Energy Saver Mode
(ESM) on or off.
Use the START key to select unit (1=KM & 0=Mile on TIME window).
Use the ENTER / CHANGE DISPLAY key to enter the languages
selection and to select a language. (0=English, 1=Germany, 2=Dutch,
3=French on TIME window).
ENG 4
Information
Accumulated Time and Distance
Press and hold the START key for 5 seconds to clear all data.
Unit of Time is Hour on TIME window. Unit of Distance is KM or Mile
based on your setting in the DISTANCE window.
SECOND LEVEL
ENG 8
Software Version
To Get to ENG 8 - Enter into ENG 3, then press and hold the SPEED
UP and INCLINE DOWN keys at the same time for 3-5 seconds.
Press ENTER at P0 - Software version.
Press ENTER at P1 - Select speed up rate (factory only setting).
Press ENTER at P3 - Hold the START key to clear all data.
Press the ENTER key to save changes.
