2. For optimal performance of the resistance
system, and to minimize wear on the brake pad,
the WD40 or Brunox lubricant spray should be
applied to the brake pad using the lubrication holes
on the plastic part of the brake pad or
preferably directly on the brake pad. If fuzz or lint
appears on the brake pad, the brake pad has be-
come too dry: lubricant spray should be applied
more frequently. Make sure brake pad is thoroughly
soaked from end to end with lubricant spray.
Then, wipe the excess off.
Version 1.1 2010 SBLS Copyright by Indoorcycling Group GmbH 2010 | www.indoorcycling.com
ENG 24
2
"#$%&%f%g-
[) '
') ] '
\[ "#$%& %f% g )
' [ ' ) [ q
] ''') )
q )
}|<*]?\ [ )
|
1. Make sure that the LIVESTRONG S-Series Indoor Cycle is level. If the LIVESTRONG
%<% " => [ > A ?
rear stabilizer until the rocking motion is eliminated (see „How to move the LIVESTRONG
%<%"=>on page 23).
Y !"#$%'*+;%<%"=>-
infected and cleaned to maintain a hygienic environment. First, apply a disinfectant spray to the
handlebars and the saddle. Using a lint-free cloth, dry the handlebars and the saddle. Next, apply
a small amount of disinfectant to a lint-free cloth and clean the adjustment knobs and the lock
handles. Avoid using strong detergents on the LIVESTRONG S-Series s Indoor Cycle fra-
me.
}K
1. Apply a small amount of the lubrication spray to a lint-free cloth, and thoroughly clean
A>
LIVESTRONG S-Series Indoor Cycle.
PREVENTATIVE MAINTENANCE
