8
LUBRICATING THE BLADE
Lubricate both friction surfaces of the front cutting teeth and the hind supporting
areas.
1. Hind supporting areas: Push the oscillating part to one side; lubricate the visible
friction surface on the other side. Drop a small amount of oil on both sides.
2. Front cutting teeth: Drop a small amount of oil on the blade teeth and spread
evenly. Slightly move the oscillating part to permeate the oil between the
blades.
CLEANING THE MAIN BODY AND ACCESSORIES
1. Switch off and unplug the trimmer before cleaning.
2. Wipe with a soft damped cloth.
3. Allow it to air-dry before use.
COMB ATTACHMENTS
You may adjust the cutting length from 3-12mm by attaching the comb
attachment.
1. The cutting length is marked on the of comb attachments.
2. Select a suitable size and slide the blade into the comb attachment.
BLADE LIFE
The service life of the blade may be shortened in the following situations:
1. The blade has not been lubricated properly over a long period.
2. The blade cuts objects other than hair or unclean hair.
3. A foreign object damages the blade edge.
4. The blade is subjected to an impact.
If the cutting efficiency is reduced substantially despite proper maintenance, the
blade has exceeded its service life and should be replaced.
